Construction Hoist

Products

Construction Hoist

The CH Series Construction Hoist is the workhorse of high-rise construction logistics. Available in single or twin cage configurations, this system leverages high-efficiency motors and variable frequency drives to move personnel and materials at speeds up to 63m/min. Built for high-cycle usage, the CH Series prioritizes speed, safety, and energy efficiency, ensuring that the vertical supply chain keeps pace with aggressive construction schedules.

Construction Hoist

FAB
Specifications
Product Details
Contact Us
Download brochure

Download brochure

Features

Twin cage capability
High speed (63m/min)
Energy efficient VFC

Advantages

Doubles vertical traffic capacity on a single mast
Rapid vertical travel
Low starting current

Benefits

Logistics Throughput: Handles peak shift changes and material deliveries simultaneously
Efficiency: Minimizes transit time to upper floors
Cost Reduction: Lowers site energy consumption

SPECIFICATIONS

Model	CH200 (Single)	CH200/200 (Twin)
Rated Load	2000 kg	2000 / 2000 kg
Speed	0-46 m/min or 0-63 m/min	0-46 m/min or 0-63 m/min
Control System	VFC	VFC
Motor Power	2x11 / 2x18.5 / 3x11 / 3x18.5 kW	2x (2x11) / 2x (3x18.5) kW
Cage Dimensions	3200 x 1500 x 2200 mm	3200 x 1500 x 2200 mm
Max Height	300 m	300 m

Product Details

Safety Device

If the descending speed of the hoist exceeds the rated speed, the device will automatically lock and the hoist will stop immediately. The power to the hoist is cut off.

Tie-in

The tie-in is a key supporting component that anchors the hoist to the building structure, restrains tower sway, transfers lateral loads, and ensures safe and stable vertical lifting of the equipment.

Drive Unit

The gear motor of the construction hoist drives the pinion to move up and down along the rack. This allows the rollers to travel up and down the mast.

Mast Section

The mast section is a primary load-bearing structural component that forms the main body of the hoist, provides vertical guidance for lifting, can be extended by adding sections as needed, and supports the weight of both equipment and personnel.

Rack and Pinion Drive

A forced drive system.

Variable-frequency Drive (VFD) Unit

The construction hoist is equipped with a VFD unit, allowing control of key features such as hoist control logics and smart voice module.The car features smooth start and stop operation, enhancing ride comfort for passengers.

Safety Device

If the descending speed of the hoist exceeds the rated speed, the device will automatically lock and the hoist will stop immediately. The power to the hoist is cut off.

Tie-in

Drive Unit

The gear motor of the construction hoist drives the pinion to move up and down along the rack. This allows the rollers to travel up and down the mast.

Mast Section

Rack and Pinion Drive

A forced drive system.

Variable-frequency Drive (VFD) Unit

Contact

Let’s get in touch!

Contact us - Americas

3S Americas Inc.

2920 Telecom Parkway, Suite 400, Richardson, TX 75082, USA
+1 972 849 3210
info@3SAmericas.com